How To Clean A Dirt Bike Helmet – Quickly And Easily!

how to clean a dirt bike helmet

Dirt biking helmets are a bit different than motorcycle helmets, as they are open-faced. The helmets have more ventilation and get more exposure to the weather.

For this reason, cleaning your helmet regularly – especially after wet rides or sitting in a garage while raining outside is essential.

This article will explain how to Clean a Dirt Bike Helmet Properly Before Every Safe Ride.

What is Dirt Bike Helmet?

A dirt bike helmet, also known as a motocross helmet or off-road motorcycle helmet, is a type of helmet designed for off-road motorcycle riding. Dirt bike helmets come in many shapes and sizes to meet the needs of riders.

They usually have a hard shell or plastic exterior and a foam liner that provides good protection from impacts to the head. Dirt bike helmets are not required by law in most places, but they are highly recommended because of the risks involved in riding an off-road motorcycle.

Read More: Choosing The Right Dirt Bike Helmet Light For Your Riding Style

How to clean a dirt bike helmet

Materials you will need

There are a few materials that you’ll need to clean your dirt bike helmet. Some of these materials will be found in the washroom at your local bike shop, while others you may have to purchase separately.

soap and water

To start, you’ll need soap and water. Make a lather using the soap and water, and then rinse the Helmet thoroughly. Next, use a brush to scrub any dirt, oil or fuel residue from the Helmet’s surface. Finally, use a cloth to dry the Helmet.

anti-bacterial agent

The following material you’ll need is an anti-bacterial agent. This can be anything from hand sanitiser to Germ-X spray (available at most hardware stores). Apply the agent to a cloth and wipe down the Helmet exterior. Be sure to wipe down any grease or oil spots on the Helmet’s surface.

Check Also: Learn the secret to removing scratches from motorcycle helmet visors

Steps to clean a dirt bike helmet:

When cleaning your dirt bike helmet, following a few simple steps is important. Here are the tips for how to clean a dirt bike helmet step by step:

  1. Remove the helmet from the bike.
  2. Remove any debris or mud on the helmet’s surface with a brush or cloth.
  3. Wipe away any excess moisture with a dry cloth.
  4. Polish the helmet’s surface using a mild soap and water mixture if necessary.
  5. Allow the helmet to air-dry before putting it back on the bike.
  6. Store the cleaned helmet in a dry place when not in use.

How To Clean Dirt Bike Helmet Pads

Nothing is more frustrating than having dirt, dust, and debris build up on your dirt bike helmet pads. This can lead to decreased visibility while riding and can also cause damage to the pads themselves.

 Luckily, cleaning dirt bike helmet pads is easy and can be done with just a few simple steps.

  1. Remove the dirt bike helmet pads from the bicycle.
  2. Wipe down the entire pad with a cloth or a piece of paper towel dampened in water. Make sure to get into all of the nooks and crannies.
  3. If needed, use a cleaner specifically designed for motorcycle helmets to clean the pad. Be sure to follow the manufacturer’s instructions carefully.
  4. Allow the pad to air dry before putting it back on the bike.

Check Also: Are Dirt Bike Helmets Street Legal?

How to clean the inside of a dirt bike helmet?

  1. Start by removing the shell of the helmet.
  2. Use a cloth or a brush to remove any dirt, dust or hair inside the helmet.
  3. Use an anti-bacterial soap to clean the helmet’s interior and exterior surfaces.
  4. Allow the helmet to dry completely before replacing it with your new one.

Check Also: How to Clean Inside of Motorcycle Helmet?

How Often Should I Clean My Dirt Bike Helmet?

Clean your dirt bike helmet as frequently as necessary to avoid the build-up of dirt, dust, and other debris. If you notice that the helmet is not appearing clean or if it feels dusty or sticky, take it off and give it a good cleaning.

Read More: The 10 Best Dirt Bike Helmets For Your Riding Safety

How To Clean Muddy Dirt Bike Helmet?

If you have ever ridden a dirt bike in mud or wet conditions, helmets can get pretty dirty. Mud and rain can get inside the helmet, and if it is not cleaned regularly, it can start to stink and become a breeding ground for bacteria.

There are many ways to clean a muddy dirt bike helmet. One easy way is to use a vacuum cleaner with a hose attachment. Ensure the area around the helmet is well-covered so that any water or mud that gets sucked up will be collected. Be careful not to damage the helmet while cleaning it.

Another way to clean a muddy dirt bike helmet is boiling water. Fill a pot with enough water to cover the helmet and bring it to a boil. Carefully pour the hot water over the top of the helmet, letting it run down the sides for about 10 minutes.

Check Also: Learn the secrets to enlarging a motorcycle helmet without damaging it.

FAQ of Cleaning Dirt Bike Helmet

How long does it take to clean a dirt bike helmet?

Depends on how dirty the helmet is and how much time you have. Generally, it takes about 30 minutes to an hour to clean a dirt bike helmet.

You’ll need soap, water, and a toothbrush. Start by cleaning the exterior of the helmet with soap. Then use water to rinse it off. Take care not to get any water inside the liner of the helmet. Finally, use a toothbrush to scrub any dirt or grime off the helmet’s surface.

How long can a dirt bike helmet be used without washing it?

Dirt bike helmets are often treated with a sealant that keeps them watertight. While this prevents dirt and rain from entering the helmet, it can also build sweat and oils on the inside.

 When these materials are exposed to moisture, bacteria can grow. This can cause an illness if the person wearing the helmet comes in contact with it.

To keep your dirt bike helmet clean and safe, it should be washed after each use.

Where can I buy a dirt bike helmet?

Dirt bike helmets can be bought online and in person at various stores. Some popular locations for dirt bike helmets include Walmart, Target, and Dick’s Sporting Goods.

 Finding a helmet that fits well and is comfortable to wear is important. Some riders prefer a softer helmet while others prefer a more rigid one.

 It is also important to make sure the helmet meets the safety standards set by the U.S. Department of Transportation (DOT).

How do I get my dirt bike helmet cleaner?

You can use a toothbrush, and you can also use an old toothpaste tube.

What should I be careful of when cleaning my helmet?

Be careful not to get any water inside your helmet.


In conclusion, cleaning your dirt bike helmet is easy with a few steps. Be sure to use a mild soap and water solution on a clean cloth, and then dry the helmet off. Remember to store your helmet in a dry place when not in use.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *