How to Remove The Vsun Peak on Bell Motocross Helmet?

Bell is one of the most popular brands regarding motocross helmets. However, many riders have found that the vsun peak on the helmet can be quite a nuisance.
The vsun peak on a bell motocross helmet can obstruct the rider’s view and cause discomfort, so removing it before riding is essential.
In this blog post, we’ll show you how to remove the vsun peak on your Bell motocross helmet so that you can enjoy riding without any distractions.
How to remove the vsun peak on the bell motocross helmet?
Assuming that you would like a detailed explanation of how to remove the visor/peak of a Bell Motocross helmet:
Preparation
- Start by examining the helmet and locating the four screws holding the peak. Two will be located at the front of the helmet, near your eyebrows, and two at the back, near your hairline.
- Using a Phillips head screwdriver, unscrew each of the four screws until they are loose enough to be removed by hand. Be careful not to strip them as you do this.
- Once all four screws have been removed, gently pull on the peak to detach it from the helmet. If it is stuck, use a flathead screwdriver to pry it loose.
Removal process
- With the peak now detached from the helmet, inspect it for any dirt or debris clinging to it. Use a soft cloth to wipe away any grime.
- If there are any stubborn spots, you can use a mild soap and water solution to clean them off. Be sure to rinse thoroughly and dry completely before proceeding.
- Now that the peak is clean, you can begin reattaching it to the helmet. Start by aligning the two front screws, then move on to the two back screws.
- Tighten each screw until it is snug, but be careful not to overtighten, as this could strip them or damage the threads. Once all four screws are in place, give the peak a gentle tug to ensure it is secure before putting your helmet back on.
Read More: How to Remove The Visor on a Bell Motocross Helmet?
Why you should remove the vsun peak on the bell motocross helmet
Improved safety
The peak on the helmet can obstruct the rider’s view, which can be dangerous. The peak can also contact other riders sometimes, leading to accidents.
Better visibility
The peak can also block the rider’s vision when riding in low-light conditions or at night. This can make it difficult to see obstacles in the path and may even lead to collisions.
Enhanced comfort
The peak can cause discomfort if not aligned correctly with the helmet opening. It can also rub against the rider’s face, irritating.
When to remove the vsun peak on the bell motocross helmet
Before riding
It is important to remove the Vsun peak on the bell motocross helmet before riding for several reasons.
First, the peak can obstruct the view, making it difficult to see obstacles in the path.
Second, the peak can cause discomfort due to its firmness and positioning.
Third, the peak can interfere with proper functioning helmets and other safety gear. For these reasons, it is best to remove the peak before riding.
After riding
After riding, it is also important to remove the vsun peak on the bell motocross helmet for similar reasons.
The peak can obstruct the view, making it difficult to see obstacles in the path. Additionally, the peak can cause discomfort due to its firmness and positioning.
Finally, the peak can interfere with the proper functioning of helmets and other safety gear. For these reasons, removing the peak after riding is also best.
When not in use
When not in use, it is also important to remove the vsun peak on the bell motocross helmet for similar reasons. The peak can obstruct the view, making it difficult to see obstacles in the path.
Additionally, the peak can cause discomfort due to its firmness and positioning.
Finally, the peak can interfere with the proper functioning of helmets and other safety gear. For these reasons, it is best to remove the peak when not in use.
Read More: Where Are Bell Motocross Helmets Manufactured?
The importance of removing the vsun peak on the bell motocross helmet.

How the vsun peak can obstruct the view
The vsun peak on a motocross helmet can obstruct the rider’s view, especially when looking up.
This can be dangerous because it can make it difficult to see obstacles in the path. Additionally, the sun can glare off the peak, making it difficult to see.
How the vsun peak can cause discomfort
The vsun peak can also cause discomfort for the rider. The peak can dig into the forehead and cause headaches.
Additionally, the peak can block airflow to the face, making breathing difficult.
Conclusion
It is important to remove the vsun peak on the bell motocross helmet for improved safety, visibility, and comfort. The peak can obstruct the view and cause discomfort while riding.

Hey, I’m Hrithik Hossain. I am the head of helmethacks.com, which specializes in safety helmets. I am looking to connect with anyone interested in purchasing a helmet or who has any questions about different types of helmets. I have over 8 years of experience as a helmet expert, and I can’t wait to help you find the perfect helmet for you. I can help you with any questions regarding helmets, from the best brands to fitting, style, and more! I really enjoy keeping people safe by ensuring they have the best protection possible.